The quartz sand scrubbing machine and desilting hopper for foreign customers have been shipped. The quartz sand scrubbing machine is mainly used to scrub clay and film iron on the surface of quartz sand below 3mm in the early stage. It can be used in quartz sand wet production lines and fracturing sand. Production lines, especially fracturing sand production lines, are mainly made of natural sand such as sea sand, river sand, desert sand, etc. The surface of this sand has a layer of clay that needs to be wiped off with a quartz sand scrubber to ensure subsequent smooth operation of the process. The quartz sand scrubbing machine is the flagship product of Guote Equipment and is also a star product. It has the advantages of high scrubbing strength, wear resistance and corrosion resistance.

The desilting hopper is an essential desliming equipment in the quartz sand wet production line. It is mainly used to reduce the mud content and concentration of quartz sand. Its shape is an inverted cone, it occupies a small area, has a long settlement route, and has a remarkable mud removal effect. The ore particle size is generally less than 2mm. The slurry is fed into the central cylinder along the tangential direction, and flows out from the bottom edge after being buffered. The outflowing slurry flows out radially to the surrounding overflow weir. In this process, coarse particles whose settling velocity is greater than the rising velocity of the liquid flow will settle in the tank and be discharged through the bottom sand settling. Fine particles enter the overflow tank along with the surface slurry.

Customers in need can ask us!